◤ Insulation fastener ø8 – ETX-MT Z
Screwed in or nailed in plastic anchors for fixing of external thermal insulation composite systems (ETICS) with rendering – with a metal-plastic specific threaded nail
Product
Diameter: 8mm
Length range: 95-415mm
Anchoring zone: 25~45mm
Sleeve: polypropylene
Pin: galvanized steel with a plastic insulator to prevent thermal bridging and TX40 socket
Pre-assembled (Z)
Unit package: 100 pcs (carton)
Product description
ETX fastener is a product with a wide range of applications. It can be fixed in any category of substrate. With a diameter of 8mm and a short anchoring zone (ABCD: 25mm, E: 45mm), much better strength parameters are achieved, as well as installation time is significantly reduced.
Features & Benefits
Quality certified by CE and European Technical Assessment
Advanced 8mm insulation anchor with a galvanized steel pin with plastic cover to prevent thermal bridging.
TX40 socket for screw in.
Pre-assembled – screw inserted into the fastener sleeve right out of the box.
Faster installation thanks to minimized embedment depth: 25mm (cat. ABCD) and 45mm (cat. E)
Optimized anchor zone design delivers high load capacity (up to 1.3 kN)
High disc stiffness (1.0 kN/mm) and strength (1.95 kN)
Suitable for building thermo-renovation applications
Compatible with optional pressure plates (TDW)
Can be installed flush or recessed using the ZP-FS 67mm cutter and polystyrene plugs
Applications
For mechanical fastening of thermal insulation materials (e.g., EPS, mineral wool, PIR) into concrete or masonry substrates.
Material
Sleeve: polypropylene
Pin: galvanized steel with a plastic insulator to prevent thermal bridging
Substrate categories
A
Concrete C12/15, Concrete C20/25–C50/60
B
Solid clay brick MZ, solid silicate brick KS
C
Perforated silicate brick KSL, hollow brick Hlz, Porotherm 25
D
Lightweight aggregate concrete (LAC)
E
Autoclaved aerated concrete AAC2-AAC7
Applications
ETICS / WDVS (external thermal insulation composite systems)
EPS / XPS boards
Mineral wool panels
PIR boards
Cork
Wood fiber boards
Multimedia
Installation instructions
| EPS | MW | ||
| Zalecana ilość sztuk | sztuk / m2 | 4-6 / m2 | 6-8 / m2 |
| Zalecana ilość sztuk przy narożnikach budynku | sztuk / m2 | 6-8 / m2 | 8-10 / m2 |
| Minimalny rozstaw | Smin ≥ [mm] | 100 | 100 |
| Minimalna odległość od krawędzi | Cmin ≥ [mm] | 100 | 100 |
Technical data
| Typ | Łącznik | Efektywna głębokość kotwienia Habcd/He [mm] | Głębokość otworu montażowego ABCD/E [mm] | Zalecana grubość ETICS dla kat. ABCD (montaż zagłębiony) [mm] | Zalecana grubość ETICS dla kat. E (montaż zagłębiony) [mm] | ||
| Średnica Dnom [mm] | Długość La [mm] | Średnica talerza Dk [mm] | |||||
| ETX-MT Z 8x95 | 8 | 95 | 60 | 25 / 45 | 35 / 55 | 60 (80) | 40 (60) |
| ETX-MT Z 8x115 | 8 | 115 | 60 | 25 / 45 | 35 / 55 | 80 (100) | 60 (80) |
| ETX-MT Z 8x135 | 8 | 135 | 60 | 25 / 45 | 35 / 55 | 100 (120) | 80 (100) |
| ETX-MT Z 8x155 | 8 | 155 | 60 | 25 / 45 | 35 / 55 | 120 (140) | 100 (120) |
| ETX-MT Z 8x175 | 8 | 175 | 60 | 25 / 45 | 35 / 55 | 140 (160) | 120 (140) |
| ETX-MT Z 8x195 | 8 | 195 | 60 | 25 / 45 | 35 / 55 | 160 (180) | 140 (160) |
| ETX-MT Z 8x215 | 8 | 215 | 60 | 25 / 45 | 35 / 55 | 180 (200) | 160 (180) |
| ETX-MT Z 8x235 | 8 | 235 | 60 | 25 / 45 | 35 / 55 | 200 (220) | 180 (200) |
| ETX-MT Z 8x255 | 8 | 255 | 60 | 25 / 45 | 35 / 55 | 220 (240) | 200 (220) |
| ETX-MT Z 8x275 | 8 | 275 | 60 | 25 / 45 | 35 / 55 | 240 (260) | 220 (240) |
| ETX-MT Z 8x295 | 8 | 295 | 60 | 25 / 45 | 35 / 55 | 260 (280) | 240 (260) |
| ETX-MT Z 8x335 | 8 | 335 | 60 | 25 / 45 | 35 / 55 | 300 (320) | 280 (300) |
| ETX-MT Z 8x375 | 8 | 375 | 60 | 25 / 45 | 35 / 55 | 340 (360) | 320 (340) |
| ETX-MT Z 8x415 | 8 | 415 | 60 | 25 / 45 | 35 / 55 | 380 (400) | 360 (380) |
Characteristic resistance
| Podłoże | ||||||||||||||
| Beton C12/15 | Beton C16/20-C50/60 | Cienkościenne elementy z betonu C16/20 ÷ C50/60 | Cegła ceramiczna pełna MZ | Cegła silikatowa pełne KS | Cegła silikatowa perforowana KSL, a=40mm | Porotherm 25, a=12mm | Porotherm 25, a=17mm | Elementy otworowe z betonu na kruszywie lekkim HBL a=33mm | Elementy otworowe z betonu na kruszywie lekkim Tekno Amerblok PK17,8 , a=30mm | Elementy otworowe z betonu na kruszywie lekkim Tekno Amerblok PK19 , a=30mm | Elementy z betonu na kruszywie lekkim LAC | Elementy z betonu komórkowego AAC2 | Elementy z betonu komórkowego AAC7 | |
| Kategoria użytkowa | ||||||||||||||
| A | A | A | B | B | C | C | C | C | C | C | D | E | E | |
| Nośność charakterystyczna [kN] | ||||||||||||||
| ETX-MT (25mm) | 0,90 | 1,30 | 1,30 | 1,30 | 1,30 | 1,30 | 0,50 | 0,70 | 0,60 | 1,30 | 1,30 | 0,60 | ||
| ETX-MT (45mm) | 0,50 | 0,90 |
Logistic information
| Typ | Kod towaru | Ilość [szt] | Waga [kg] | Kod EAN | ||
| Opakowanie jednostkowe (karton) | Paleta (120x80x180 [cm]) | Opakowanie jednostkowe (karton) | Paleta (120x80x180 [cm]) | |||
| ETX-MT Z 8x95 | EMT95Z | 100 | 10000 | 2,20 | 240 | 5907812671761 |
| ETX-MT Z 8x115 | EMT115Z | 100 | 8000 | 2,45 | 216 | 5907812671778 |
| ETX-MT Z 8x135 | EMT135Z | 100 | 8000 | 2,80 | 244 | 5907812671785 |
| ETX-MT Z 8x155 | EMT155Z | 100 | 5600 | 3,05 | 191 | 5907812671792 |
| ETX-MT Z 8x175 | EMT175Z | 100 | 5600 | 3,30 | 205 | 5907812671808 |
| ETX-MT Z 8x195 | EMT195Z | 100 | 5600 | 3,55 | 219 | 5907812671815 |
| ETX-MT Z 8x215 | EMT215Z | 100 | 5600 | 3,85 | 236 | 5907812671822 |
| ETX-MT Z 8x235 | EMT235Z | 100 | 5600 | 4,20 | 255 | 5907812671839 |
| ETX-MT Z 8x255 | EMT255Z | 100 | 5600 | 4,50 | 272 | 5907812671846 |
| ETX-MT Z 8x275 | EMT275Z | 100 | 4200 | 4,75 | 220 | 5907812671853 |
| ETX-MT Z 8x295 | EMT295Z | 100 | 4200 | 5,05 | 232 | 5907812671860 |
| ETX-MT Z 8x335 | EMT335Z | 100 | 4200 | 5,65 | 257 | 5908275918790 |
| ETX-MT Z 8x375 | EMT375Z | 100 | 4200 | 6,25 | 283 | 5908275918554 |
| ETX-MT Z 8x415 | EMT415Z | 100 | 4200 | 6,95 | 312 | 5908275918752 |
Related products
Plastic styrofoam dowels SWT
Cutter for styrofoam and mineral wool ZP-FS 67mm
Styrofoam disc
