◤ Insulation fastener ø8 – ETX-PA Z
Nailed in plastic anchors with a plastic specific nail for fixing of external thermal insulation composite systems (ETICS) with rendering
Product
Diameter: 8mm
Length range: 75-295mm
Anchoring zone: 25~45mm
Sleeve: polypropylene
Pin: glass fiber reinforced polyamide
Pre-assembled (Z)
Unit package: 100 pcs (carton)
Product description
ETX fastener is a product with a wide range of applications. It can be fixed in any category of substrate. With a diameter of 8mm and a short anchoring zone (ABCD: 25mm, E: 45mm), much better strength parameters are achieved, as well as installation time is significantly reduced.
Features & Benefits
Quality certified by CE and European Technical Assessment
Advanced insulation anchors with a polyamide pin reinforced with glass fiber.
With plastic pins, the greatest challenge is the balance between achieving high pull-out values in lower quality or hollow materials and maintaining pin durability based on the material’s properties.
As a result, the market either offers plastic pins with low pull-out strength, or pins that often crack during installation in harder substrates like concrete.
To solve this, we developed a specially designed pin with an additional notch at the tip. This shape ensures the highest pull-out performance, and in hard substrates, it slightly compresses to reduce friction, completely eliminating the problem of cracking pins during installation.
Pre-assembled – screw inserted into the fastener sleeve right out of the box.
Faster installation thanks to minimized embedment depth: 25mm (cat. ABCD) and 45mm (cat. E)
Optimized anchor zone design delivers high load capacity (up to 1.3 kN)
High disc stiffness (1.0 kN/mm) and strength (1.95 kN)
Suitable for building thermo-renovation applications
Compatible with optional pressure plates (TDW)
Can be installed flush or recessed using the ZP-FS 67mm cutter and polystyrene plugs
Applications
For mechanical fastening of thermal insulation materials (e.g., EPS, mineral wool, PIR) into concrete or masonry substrates.
Material
Sleeve: polypropylene
Pin: glass fiber reinforced polyamide
Substrate categories
A
Concrete C12/15, Concrete C20/25–C50/60
B
Solid clay brick MZ, solid silicate brick KS
C
Perforated silicate brick KSL, hollow brick Hlz, Porotherm 25
D
Lightweight aggregate concrete (LAC)
E
Autoclaved aerated concrete AAC2-AAC7
Applications
ETICS / WDVS (external thermal insulation composite systems)
EPS / XPS boards
Mineral wool panels
PIR boards
Cork
Wood fiber boards
Multimedia
Installation instructions
| EPS | MW | ||
| Zalecana ilość sztuk | sztuk / m2 | 4-6 / m2 | 6-8 / m2 |
| Zalecana ilość sztuk przy narożnikach budynku | sztuk / m2 | 6-8 / m2 | 8-10 / m2 |
| Minimalny rozstaw | Smin ≥ [mm] | 100 | 100 |
| Minimalna odległość od krawędzi | Cmin ≥ [mm] | 100 | 100 |
Technical data
| Typ | Łącznik | Efektywna głębokość kotwienia Habcd/He [mm] | Głębokość otworu montażowego ABCD/E [mm] | Zalecana grubość ETICS dla kat. ABCD (montaż zagłębiony) [mm] | Zalecana grubość ETICS dla kat. E (montaż zagłębiony) [mm] | ||
| Średnica Dnom [mm] | Długość La [mm] | Średnica talerza Dk [mm] | |||||
| ETX-PA Z 8x75 | 8 | 75 | 60 | 25 / 45 | 35 / 55 | 40 (60) | 20 (40) |
| ETX-PA Z 8x95 | 8 | 95 | 60 | 25 / 45 | 35 / 55 | 60 (80) | 40 (60) |
| ETX-PA Z 8x115 | 8 | 115 | 60 | 25 / 45 | 35 / 55 | 80 (100) | 60 (80) |
| ETX-PA Z 8x135 | 8 | 135 | 60 | 25 / 45 | 35 / 55 | 100 (120) | 80 (100) |
| ETX-PA Z 8x155 | 8 | 155 | 60 | 25 / 45 | 35 / 55 | 120 (140) | 100 (120) |
| ETX-PA Z 8x175 | 8 | 175 | 60 | 25 / 45 | 35 / 55 | 140 (160) | 120 (140) |
| ETX-PA Z 8x195 | 8 | 195 | 60 | 25 / 45 | 35 / 55 | 160 (180) | 140 (160) |
| ETX-PA Z 8x215 | 8 | 215 | 60 | 25 / 45 | 35 / 55 | 180 (200) | 160 (180) |
| ETX-PA Z 8x235 | 8 | 235 | 60 | 25 / 45 | 35 / 55 | 200 (220) | 180 (200) |
| ETX-PA Z 8x255 | 8 | 255 | 60 | 25 / 45 | 35 / 55 | 220 (240) | 200 (220) |
| ETX-PA Z 8x275 | 8 | 275 | 60 | 25 / 45 | 35 / 55 | 240 (260) | 220 (240) |
| ETX-PA Z 8x295 | 8 | 295 | 60 | 25 / 45 | 35 / 55 | 260 (280) | 240 (260) |
Characteristic resistance
| Podłoże | ||||||||||||||
| Beton C12/15 | Beton C16/20-C50/60 | Cienkościenne elementy z betonu C16/20 ÷ C50/60 | Cegła ceramiczna pełna MZ | Cegła silikatowa pełne KS | Cegła silikatowa perforowana KSL, a=40mm | Porotherm 25, a=12mm | Porotherm 25, a=17mm | Elementy otworowe z betonu na kruszywie lekkim HBL a=33mm | Elementy otworowe z betonu na kruszywie lekkim Tekno Amerblok PK17,8 , a=30mm | Elementy otworowe z betonu na kruszywie lekkim Tekno Amerblok PK19 , a=30mm | Elementy z betonu na kruszywie lekkim LAC | Elementy z betonu komórkowego AAC2 | Elementy z betonu komórkowego AAC7 | |
| Kategoria użytkowa | ||||||||||||||
| A | A | A | B | B | C | C | C | C | C | C | D | E | E | |
| Nośność charakterystyczna [kN] | ||||||||||||||
| ETX-PA (25mm) | 0,90 | 1,30 | 1,30 | 1,20 | 1,20 | 1,20 | 0,50 | 0,70 | 0,60 | 1,30 | 1,30 | 0,60 | ||
| ETX-PA (45mm) | 0,50 | 0,90 |
Logistic information
| Typ | Kod towaru | Ilość [szt] | Waga [kg] | Kod EAN | ||
| Opakowanie jednostkowe (karton) | Paleta (120x80x180 [cm]) | Opakowanie jednostkowe (karton) | Paleta (120x80x180 [cm]) | |||
| ETX-PA Z 8x75 | EPA75Z | 100 | 10000 | 1,10 | 130 | 5907812671570 |
| ETX-PA Z 8x95 | EPA95Z | 100 | 10000 | 1,20 | 140 | 5907812671587 |
| ETX-PA Z 8x115 | EPA115Z | 100 | 8000 | 1,30 | 124 | 5907812671594 |
| ETX-PA Z 8x135 | EPA135Z | 100 | 8000 | 1,40 | 132 | 5907812671600 |
| ETX-PA Z 8x155 | EPA155Z | 100 | 5600 | 1,60 | 110 | 5907812671617 |
| ETX-PA Z 8x175 | EPA175Z | 100 | 5600 | 1,80 | 121 | 5907812671624 |
| ETX-PA Z 8x195 | EPA195Z | 100 | 5600 | 2,00 | 132 | 5908275918264 |
| ETX-PA Z 8x215 | EPA215Z | 100 | 5600 | 2,10 | 138 | 5908275918271 |
| ETX-PA Z 8x235 | EPA235Z | 100 | 5600 | 2,20 | 143 | 5908275918394 |
| ETX-PA Z 8x255 | EPA255Z | 100 | 5600 | 2,30 | 149 | 5908275918400 |
| ETX-PA Z 8x275 | EPA275Z | 100 | 4200 | 2,50 | 125 | 5908275918417 |
| ETX-PA Z 8x295 | EPA295Z | 100 | 4200 | 2,60 | 130 | 5908275918783 |
Related products
Plastic styrofoam dowels SWT
Cutter for styrofoam and mineral wool ZP-FS 67mm
Styrofoam disc
